Second field
Injection molding method for preparing hydraulic cylinder block, piston rod bushing, machine tool guide rail wear and scratches, etc.
Three performance indicators
Indicator
Color
Dark gray
Density
Weight ratio B
Volume ratio B
Operating time mixing,
< br/> Complete curing time
Friction coefficient
Compressive strength B/
< br/> Tensile strength B/
Shear strength B/
Working temperature
~
This parameter is obtained from temperature ℃ and relative humidity under laboratory conditions. Since the actual working conditions are more complicated, it is recommended that the user make adjustments based on the actual working conditions. G.
Four usage methods
Surface treatment: Polish or sandblast to remove dust, oil, and rust on the surface of the adherend, and finally clean with detergent.
With glue, mix the two components evenly according to the proportion, and the color should be consistent.
Glue application: Apply the adjusted coating glue evenly to the surface of the object to be protected and reach a certain thickness.
Cure to be completely cured at room temperature or at normal temperature + heated to ℃ and kept at room temperature for complete curing.
Five Precautions
When the temperature is lower than ℃, appropriate heating measures should be taken, otherwise the curing time should be extended.
The operating time will be shortened when the ambient temperature is high or the amount of glue mixed is large.
This product is stored airtightly in a cool, dry environment and has a shelf life of one year and is transported as non-dangerous goods.
This product is a non-dangerous product, but please keep it out of your mouth and eyes and avoid long-term direct contact with the body.